• Hollowing Carbide Turning Tool Rig

Hollowing Carbide Turning Tool & Turners Laser Guide


The Turners Laser Guide enables you to know the location of a point on the cutting edge in real time even while the vessel is spinning and material is being removed. It utilizes a laser pointer to indicate the cutter position on the outside of the vessel while the cutter is actually inside the vessel and is otherwise impossible to accurately locate. The Turners Laser Guide can be attached to either to the turning tool ferrule or shaft ranging from 3/4" to1-1/4" in diameter. With the stainless steel supports you can turn vessels 10" deep by 20" in diameter. The Turners Laser Guide can be set to show the position of a cutter or to show the offset to give you the ability to see the wall thickness of your vessel while it is spinning. The Turners Laser Guide comes complete with a laser pointer that uses one AAA battery which is included.

The Turners Laser Guide Includes:


  • 1 each Laser Pointer

  • 1 each Thickness Gauge

  • 1 each Universal Mounting Base

  • 1 each Upright Support Arm

  • 1 each 90° Bi-directional Bracket

  • 1 each Laser Support Arm

  • 1 each Height Stop Ring

  • 1 each AAA Battery

The Savannah Hollowing Carbide turning tool is the perfect tool for under-cutting hollow forms. Designed to allow any skill level of turners to achieve high quality results for hollowing work with virtually no fuss. The unique shape of the hollower neck is designed to give you better access to the most difficult hollow form shapes. The Handle measures approximately 19” in length from the butt to the stainless steel ferrule and is coated with a rubber grip at the base to reduce hand fatigue. The shank is flat on both sides offering you great stability while hollowing small or large forms. The shank measure approximately 8-3/4” from the top of the stainless steel ferrule to the center of the carbide cutter head. The round carbide cutter head can be rotated as needed for clean, sharp cutting edge. Once the carbide cutter is completely used up, simply replace the tip with a new one (item#10755).


  • Sharpening not necessary
  • Last longer than steel tools
  • Replaceable cutter heads
  • Solid ash handle is coated with a soft rubber grip
  • Shaft length is approximately 8”
  • Handle length is approximately 19-3/4” from the butt to the stainless steel ferrule
  • Diamond carbide cutter head included

Please Note: The carbide cutter on this tool is NOT interchangeable with any of the other Savannah Carbide Turning Tools (7537,7538 & 7540).

Write a review

Please login or register to review

Hollowing Carbide Turning Tool Rig

Savannah Hollowing Carbide Turning Tool Rig QR Code
  • Brand: Savannah
  • Product Code: Hollowing Carbide Turning Tool Rig
  • Availability: In Stock
  • $179.99

  • Ex Tax: $179.99